Hydraulic assembly presses

LSC 6010

Hydraulic assembly press LSC 6010 is designed to perform pressing operations in engineering or other industrial production, where it is used mainly for the pressing of nuts, bolts and blocks into thin metal or plastic sheets. The press may also be used for performing offsets and riveting.

Technical description

The main body of the machine consists of a solid "C" frame with a control panel fitted to its right side. The machine is fitted on a robust base that covers the hydraulic aggregate and tool box. The implemented electronically programmable unit enables continuous control of the performance of the machine. In working mode, the press is controlled with a foot switch and the safety sensors prevent any injuries by the press tooling. Therefore, the machine fulfills high standards of work safety.

Advantages of the machine:

• Precise setting of pressing power for every single operation
• Automatic pressing cycle
• Combined electrical and mechanical safety devices
• Programmable control unit

Parameters

		LCS 6010
Dimensions	[mm]	1950x725x1040
Weight	[kg]	208
Maximum pressing force	[N]	60 000
Maximum distance of press element from border of the part	[mm]	420
Upstroke	[mm]	200
Oil - Quantity	[l]	Hydraulic oil - 16 l
Voltage	[V]	3/N/PE AC 400/230
Frequency	[Hz]	50
Current	[A]	4,0
Output	[W]	1500
Working cycle duration	[sec.]	2,5 až 5,2 (dle zdvihu)
Acoustic noise level	[dB]	75